Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

>> Side Scuttle
>> Window
>> Bilge Water Separator
>> Sewage Tratement Plant

The oily water separator consists of four processes, which integrates gravity, coalescing, filtering and absorbing as one complete system. There are two chambers in first tank, the first chamber gives gravity oil separating, and equips with oil detecting and releasing device; after the blige water flows into second chamber, where tiny oil drops will coalesces into bigger one and floating back to first chamber.

In second tank, a filtering element is fitted where solid perticles will be remove property.

In third tank, there is super-absorbing materials there, which makes emulsified oil absorbing. Effluent, before flowing overboard, is to be partially pass into an oil content monitor, a measuring point set at 15PPM as rule request, which gives cntrol of effluent either overboard discharging or blige return. Most of case, Hansun oily water separator has an achivement of treatement less than 5PPM.

Model OWS-05 OWS-10 OWS-25 OWS-50 OWS-100
Capacity (m 3/h) 0.5 1.0 2.5 5.0 10.0
Length (mm) 1000 1200 1400 2200 2800
Width (mm) 900 1000 1200 1500 1800
Height (mm) 1450 1450 1450 1800 1800
Drv Weight (kg) 350 400 800 1200 1800
Operation Weight (kg) 400 450 900 1600 2400
The Oil water separator is designed, tasted and manufactured under following regulation and standard:
-Marpol 73/78, amended Annex I, Regulation 16(1), (2), (4) and (5);
-IMO Resolution MEPC107(49)